Canon 10, optura20 Creating a Start-upImage, Preparations, 6.Select [YES], 1.Open the menu, 2.Select [MY CAMERA], 5.Select [MY IMAGE1], 3.Select [CREATE START-UPIMAGE]

E

Creating a Start-up Image

You can create a start-up image using a still image on the memory card or a sample

start-up image provided on the DIGITAL VIDEO SOLUTION DISK and save it as [MY IMAGE1] or [MY IMAGE2].

❍Make sure to insert a memory card with enough remaining capacity.

❍ Before you create a start-up image, you need to record a still image on the memory card.

❍Retain the original data of the still image you have set as the start-up image on your computer or removable disk.

Preparations

Record a still image on the memory card.

OR

Upload a still image from your computer to the memory card using the software in the DIGITAL VIDEO SOLUTION DISK.

For instruction on how to upload a still image to the memory card, refer to Adding Still Images from Your Computer to the Memory Card in the DIGITAL VIDEO SOLUTION DISK Software Instruction Manual.

Using a Memory Card

Setting the Still Image as Start-up Image

CAMERA	PLAY (VCR)	CARD CAMERA	CARD PLAY (VCR)
MY CAMERA		CREATE START–UP IMAGE

( 43)

1.Open the menu.2.Select [MY CAMERA].3.Select [CREATE START-UP IMAGE].

[SET THIS AS START-UP IMAGE1?], [YES] and [NO] appears.

4.Select a still image with the CARD +/– buttons and select [YES].

[SAVE AS MY IMAGE1], [MY IMAGE2] and [CANCEL] appears.

5.Select [MY IMAGE1].

[OVERWRITE MY IMAGE1?], [YES] and [NO] appears.

6.Select [YES].

•The still image will be saved, and the image that was saved to [MY IMAGE1] is erased.

•Select this image as start-up image following the procedure in Customizing the

Camcorder ( 49).

136