Canon 10, optura20 Printing with the Direct Print Function, Connecting the Printer to the Camcorder, 1222. Connect a power source to the printer and turn on the printer

E

Printing with the Direct Print Function

You can print still images by connecting the camcorder to a printer with Direct Print

function. The Direct Print function can also be used with the print order settings

( 120).

❍Observe the following precautions during printing, otherwise printing may not be performed correctly.

-Do not turn off the camcorder or the printer.

-Do not change the position of the TAPE/CARD switch.

-Do not detach the cable.

-Do not remove the memory card.

❍Still images not recorded with this camcorder may not be printed correctly on a printer with direct print function.

❍The direct print function is supported by Canon Card Photo Printers with the

logo and Canon Bubble Jet Printers with the logo.

❍Refer to the instruction manual of each printer for information on which interface cable to use with the camcorder.

The Card Photo Printers CP-10 and CP-100 are supplied with two direct interface cables. Use the cable with the USB logo on the connector (DIF-100).

❍We recommend powering the camcorder from a household power source.

❍Refer also to the instruction manual of the respective printer.

❍The screenshots in this section are examples taken from a printer with direct print function. Options for the [Style] category will differ slightly depending on the printer.

Connecting the Printer to the Camcorder

Using a Memory Card

Printer with

direct print function

1. Turn off the camcorder and insert a memory card that contains still images.1222. Connect a power source to the printer and turn on the printer.