Changing Shooting Function Settings
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for postcard size prints.
●Choose [Disp. Overlay], then press the qr buttons to choose an option.
Grid Lines | A grid overlays the display. | |
|
| |
| Gray bars will appear on the top | |
3:2 Guide | and bottom of the display. This | |
area will not print when printing | ||
| ||
| on paper with a 3:2 aspect ratio. | |
Both | Both grid lines, and the 3:2 guide | |
will appear. | ||
|
•In
•Grid Lines will not be recorded on the image.
• The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas.
Changing the IS-Mode Settings
●Choose [IS Mode], then press the qr buttons to choose an option.
Image stabilization is always on.
You can confirm the result Continuous directly on the display, which
makes it easier to check the composition or focus.
Shoot Only | Image stabilization is only active | |
at the moment of shooting. | ||
| ||
| Image stabilization only counters | |
Panning | up and down motion. This option | |
is recommended for shooting | ||
| ||
| objects moving horizontally. |
•If camera shake is too strong, attach the camera to a tripod. You should set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically.
119