Checking the Focus
You can magnify the area of a recorded image that was inside the AF Frame, or the area of a face that was detected, to check the focus.
Press the lbutton, and switch to the focus check display (p. 44).
XA white frame will appear where the AF frame or face was when the focus was set.
XA gray frame will appear on a face detected during playback.
XThe area within the orange frame appears magnified.
Switch frames.
●Move the zoom lever toward k once. XThe screen shown to the left will appear.
●ress the mbutton to move to a different frame when multiple frames appear.
Change the magnification level or location.
●Use the zoom lever to change the display size, and the opqr buttons to change the display position while checking the focus.
●Pressing the n button resets the display to Step 1.
97