14-27
Cisco Systems IntelligentGigabit Ethernet Switch Modules for the IBM BladeCenter, Software Configuration Guide
24R9746
Chapter14 Configuring IGMP Snooping and MVR
Displaying IGMP Filtering and Throttling Configuration
Displaying IGMP Filtering and Throttling ConfigurationYou can display IGMP profile characteristics, and you can display the IGMP profile and maximum group
configuration for all interfaces on the switch or for a specified interface. You can also display the IGMP
throttling configuration for all interfaces on the switch or for a specified interface.
Use the privileged EXEC commands in Table 14-8 to display IGMP filtering and throttling
configuration:
Table14-8 Commands for Displaying IGMP Filtering and Throttling Configuration
Command Purpose
how ip igmp profile [profile number] Displays the specified IGMP profile or all the IGMP profiles defined on the
switch.
show running-configuration [interface
interface-id]
Displays the configuration of the specified interface or the configuration of all
interfaces on the switch, including (if configured) the maximum number of
IGMP groups to which an interface can belong and the IGMP profile applied to
the interface.