| Audio | |||
No Disc |
|
|
|
|
Programme |
|
|
| |
Digital Output | : PCM | ► |
| |
Setup | DTS | : Off | ► | |
| Dynamic Compression : Off | ► | ||
| NICAM | : On | ► | |
|
|
|
|
|
MOVE | OK | RETURN | EXIT | |
|
|
|
|
|
Setting up the Audio Options
You can connect the DVD Recorder to an external amp or Home Theatre. Allow you to setup the Audio device and sound status depending on the audio system in use.
1.With the DVD Recorder in Stop mode/No Disc mode, press the MENU button.
2.Press the ▲▼ buttons to select Setup, then press the OK or ► button.
3.Press the ▲▼ buttons to select Audio, then press the OK or ► button. Audio setup menu will be displayed.
4.Press the ▲▼ buttons to select the desired audio option, then press the OK or ► button.
5.Press the ▲▼ buttons to select the desired item, then press the OK or ► button.
System Setup
|
| Audio | ||||
No Disc |
|
|
|
|
|
|
Programme |
|
|
|
|
|
|
| Digital Output |
| PCM |
|
| |
Setup |
| DTS |
| Bitstream |
|
|
|
| Dynamic Compression : Off | ► | |||
|
| NICAM | : On | ► | ||
MOVE |
| OK | RETURN | EXIT | ||
|
|
|
|
|
|
|
|
| Audio | ||||
No Disc |
|
|
|
|
|
|
Programme |
| Digital Output |
| : PCM | ► | |
Setup |
| DTS |
| Off |
|
|
|
| Dynamic Compression | On |
|
| |
|
| NICAM |
| : On | ► | |
MOVE |
| OK | RETURN | EXIT | ||
|
|
|
|
|
|
|
▌Digital Output
•PCM : Select this when you have no equipment that can decode Dolby Digital (or
When you play Dolby Digital (or
•Bitstream : Output Dolby Digital (or
■ Digital output setting is equally applied to both Dolby Digital and
It has no relation with Digital Output setting.
■Be sure to select the correct Digital Output or you will hear no sound or loud noise.
▌DTS
•Off : Doesn’t output DTS signal.
Select this when your AV receiver or AV amplifier does not have DTS decoder.
•On : Outputs DTS Bitstream via digital output when you play DTS track. Select this only when your AV receiver (or AV amplifier) have DTS decoder.
■ When DTS soundtrack is played, sound does not output from AV Audio Output.
English - 28