Connecting to a WLAN
You can connect to a WLAN using an AP (access point) in the wireless network service area.
1Press the [Home (
•To begin this process, you must have some video or photo files stored in the camcoder’s memory card that you have not uploaded to a social network or photo/video file management site.
2Touch the
•The camcorder automatically searches for and then displays available AP devices.
•If the desired AP is not on the AP devices list, drag the list down to the bottom, and then touch Add
3To select an unsecured AP or an AP that requires a password, touch the AP. If you selected an unsecured
AP, go to Step 7. If you selected an AP that requires a
password, go to Step 4.
To select a WPS supported AP, touch the
•You can also connect to a WPS supported AP by dragging the list of APs down to the bottom, touching WPS PBC, and then pressing the [WPS] button on the AP device.
4The virtual keyboard appears. Input the required password using the virtual key board. page 75
When done, press OK, and then go to Step 7.
Wireless network
5The
6Record the PIN code displayed on the screen, and then enter the PIN code at the
minutes.
7The camcorder connects to the network you have chosen.
IconDescription
Ad hoc AP
Secured AP
WPS AP
Signal strength
Refreshing connectable APs
You can check the signal strength in the top right corner of the screen.
Icon | Signal strength |
| Not connected |
| |
|
|
| Very weak |
|
|
| Weak |
|
|
| Normal |
|
|
| Very strong |
|
|
72