Inserting/Ejecting the battery and memory card
Inserting/ejecting the battery
Battery release switch
To insert the battery
1Slide and open the battery slot cover as shown in the figure.
2Insert the battery into the battery slot until it locks.
•Make sure that the SAMSUNG logo is facing down and the battery is placed as shown in the figure.
3Close the battery slot cover.
To eject the battery
1Slide and open the battery slot cover as shown in the figure.
2Slide the Battery release switch in the direction as shown in the figure and pull out the battery.
3Close the battery slot cover.
•Samsung is not responsible for problems that are caused by using unapproved batteries. If you use batteries from other manufacturers, there is a danger of overheating, fire, or explosion.
•Purchase extra batteries to allow continuous use of your camcorder.
Getting Started 15