Inserting/Ejecting the battery and memory card
Inserting/ejecting a memory card (not supplied)
To insert a memory card
1Slide and open the memory card cover as shown in the figure.
2Insert the memory card into the card slot until it softly clicks.
•Make sure that the label portion of the card is facing up and the camcorder is placed as shown in the figure.
3Close the memory card cover.
To eject a memory card
1Slide and open the memory card cover as shown in the figure.
2Gently push the memory card to eject it.
3Close the memory card cover.
•To avoid the data loss, turn off the camcorder by pressing and hold the [Home (
•Be careful not to push the memory card too hard. The memory card may suddenly pop out.
Getting Started 16