Samsung SHR-2160P2 ●Language, 5-3 English, ●Date Format, ●Time Format, ●DST (Daylight Saving Time), The system supports 2 formats, 24 Hour / 12 Hour(AM/PM)

SHR-2160/2162/2080/2082 USER’S MANUAL

Note

[Date/Time Change]

Pressing “OK” after you change date and time, you will be asked by a pop-up window

if you really confirm the change. Here, press ”Yes” to change the time. Since Date/Time does not change in backup process, be sure to stop the backup process before you change Date/Time. If the date and time are changed, the system restarts.

Caution

[Date/Time Change]

If the Date/Time changes to the original value, the data recorded before the change may be deleted. For example, if the time is changed from 8 am to 7 am, all the data recorded between 7 am and 8 am will be deleted.

●Date FormatThe system supports 3 formats, YYYY-MM-DD / DD-MM-YYYY / MM-DD-YYYY.●Time FormatThe system supports 2 formats, 24 Hour / 12 Hour(AM/PM).●LanguageAfter selecting a language, OSD is expressed in the selected language.●DST (Daylight Saving Time)

DST sets the clock one hour ahead the local standard time. This setting enables the system to display the time adjusted for DST. If the DST is set to Off, it does not apply. To set the DST, enter the start time and end time on the right. It allows you to set month, week (e.g. 1st, 2nd, 3rd, 4th, last), day, and time.

Note

[On DST Setup]

Backup in progress will be cancelled. Recording in progress will be suspended for a moment until rebooting.

Caution

[Ending DST]

As the system goes one hour earlier, the data recorded since an hour ago will be deleted. As DST activates at the preset time, you are recommended to take the particular care of preventing any trouble incurred by data deletion or rebooting.

5-3English