Samsung SHR-2160P2 English, ●Disk End Mode, ●Disk End Beep, ●Device Information, On: Beeps when the disk is full while recording

●Device Information

Displays the number, capacity, and usage of ATA and USB devices. The displayed values are not changed. You can remove the data in HDD or USB memory after checking in the Erase box.

●Disk End Mode

Stop: Stops recording when the disk is full while recording is still in progress.

Overwrite: Deletes the previously recorded data to store new data when the disk is full during recording.

●Disk End BeepOn: Beeps when the disk is full while recording.Off: Although the disk is full while recording, it doesn't make beep sound.

Note 1

[Internal HDD]

This is a physical hard disk connected with the IDE cable inside the SHR-2160/2162/2080/2082 main body, and stores data.

[External HDD]

This is a physical hard disk connected with the port and terminal in the back of the SHR-2160/2162/2080/2082 main body, and stores data.

This can be used as Extended HDD or Backup HDD.

-Extended HDD : Supplements Internal HDD quantity. Connected, it takes the place of Internal HDD.

-Backup HDD : Backs up the data recorded in the set.

Note 2

[ATA]

Usage : Internal HDD

This is a physical hard disk connected with the IDE cable inside the SHR-2160/2162/2080/2082 main body.

[USB]

Usage : External HDD(Extended HDD or Backup HDD)

It is physical hardware that is connected to the front/back part of the SHR-2160/2162/2080/2082 with the USB port.

Caution

[Device Erase]

Data will not be deleted in the backup mode.

Please be sure to stop the backup before you delete a data. In the recording mode, suspend the recording and delete a data.

English 5-8