Samsung SHR-2160P2 3Monitoring, English, ●OSG Display, ●Event Monitoring, ●Spot Out Channel, ●Spot Out Event Monitor

3Monitoring

●Event Monitoring

It is possible to set to Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous.

① Off : Event Monitoring does not operate to turn to the screen where an event occurs.

➁3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto Sequence mode.

➂Continuous : The Event Monitoring screen remains alive until you press the “Alarm” button in the front to cancel the screen manually.

●OSG Display

① Date : The date is displayed on the screen when it is On, and not displayed when it is Off.

➁ Time : The time is displayed on the screen when it is On, and not displayed when it is Off.

➂Cam name : The Cam name is displayed on the screen when it is on, and not displayed when it is off.

➃ Status : Audio/Ptz is displayed on the screen when it is on, and not displayed when it is off.

●Spot Out Channel

Spot Out channel is used to let one of two monitors monitor a channel, focusing on it. Spot Out channel supplies two functions, continuous monitoring of only one channel and Auto Sequence to display all the channels one by one.

① Auto Sequence setup ranges from Ch1 to Ch16.

➁ In the Auto Sequence mode, Spot Out channels are displayed in turn.

➂ Duration time for Auto Sequence is as same as set for Camera setup.

●Spot Out Event Monitor

Sets if event monitoring will be executed for Spot Out channels.

① Off : The event monitoring dose not operate in the Spot Out channel.

➁ 3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto

Sequence mode.

➂Continuous : Once scrolled down, the screen remains displayed until you delete “Alarm” LED in the front manually.

English 5-16