Samsung SHR-4080P manual 77

SHR-4080P USER’S MANUAL

●Video Recording !Naming

-Being connected to SHR-4080P in Monitoring or Search Mode, you can save the video data in display in *.dvr file format. This determines how to name *.dvr file format.

-The file name depends on camera number and serial number, set to “Camera No. + Serial No.” or camera number, current date, and time, set to “Camera No. + Date”.

@Location

-As long as you are connected to SHR-4080P in Monitoring or Search Mode while recording the video data in display, this sets up a directory where *.dvr file format will be saved.

-The current default directory is “Smart Viewer Program Installed Directory \video\dvr”.

#Recording Time

-As long as you are connected to SHR-4080P in Monitoring or Search Mode while recording the video data in display, this sets up the longest recording time.

-Time setup ranges from 1 to 10 minutes. If recording exceeds the preset time at Recording Time, recording will be automatically stopped.

●File Converting [JPEG]

!Location

-You can convert the files saved in your PC in *.dvr file format into JPEG format files then the frames composing *.dvr file format will be converted into JPEG format files. Now, this designates a directory in which the converted JPEG files will be saved.

-The current default directory is “Smart Viewer Program Installed Directory \frame”.

@Rate

- When you convert *.dvr file formatted files into JPEG formatted files, this determines how many frames per a second will be converted for recording.

-Setup ranges from 1 frame to 25 frames. But, the maximum number of frames for setup may be subject to the Record Rate setup in SHR-4080 Menu. In short, if Record Rate is set to 6 ips in the Menu, Viewer will be able to record up to 6 frames per a second.

●Sequence Time

-As long as you are connected to SHR-4080P in Monitoring Mode while Auto Sequence is dominant, this sets up Auto Sequence Time. Time setup ranges from 10 to 20 minutes.

●OSD Display

-Determines if OSD shall be displayed on each channel of Smart Viewer.

-Whether you check “Enable” or not, OSD will appear or not. However, Audio icon, PTZ icon, REC icon, and Alarm/Motion event icon will not be affected by the OSD Display condition.

10-41 10-42