SHR-4080P USER’S MANUAL
●Auto Connection
-Determines if Smart Viewer shall be automatically connected to SHR-4080P or Site as soon as it starts running.
-If you check “Auto Connection On”, the name of SHR-4080P and Sites that are currently registered in DVR/Site List will be listed as follows and if you select one, it will be automatically connected to the selected SHR-4080P or Site as soon as Smart Viewer starts running.
Site Setup
-Click the [Site Setup] button for Site Setup.
-Site Setup sets up the information on DVR(SHR-4080P) or Site that you want to contact by Smart Viewer.
-Smart Viewer allows you to contact DVR(SHR-4080P) or Site registered here.
5
!User registered DVR(SHR-4080P) list will be displayed here.
@This button adds a new DVR(SHR-4080P) or deletes or revises the already- registered DVR(SHR-4080P).
#User registered Site list will be displayed here.
$ This button adds a new site or deletes or revises the already-registered Site. % This button adds DVR(SHR-4080P) selected from DVR List to the Site selected
from Site List.
●DVR List
-DVR List sets up the information on DVR(SHR-4080P) that you want to contact by Smart Viewer.
-You may register a new DVR(SHR-4080P) or delete or revise DVR(SHR-4080P) selected by a registered list then the name and IP Address of registered DVR(SHR-4080P) in DVR List will be listed.