Samsung SHR-4080P manual Viewer Setup

SHR-4080P USER’S MANUAL

Caution

-Network Password shall be composed of no more than 8 texts.

-If you leave Password blank and apply it, Warning message will pop up to ask your retyping.

Note

-The Delete key and the combination of Ctrl+C or Ctrl+V in the keyboard are not supplied to Network Password input.

-Use the BACKSPACE key to delete content.

Note

-Default Admin Password is set to 654321.

-Default User Password is set to 654321.

-IP

This sets up IP Address, Gateway, and Subnet Mask of SHR-4080P.

Caution

Be sure to consult with the network manager before you input Network IP, Gateway, and Subnet Mask.

Note

-SHR-4080P basically uses Port 554, 555, and 1101 to connect TCP.

-You shall allocate the above ports for SHR-4080P if you want to compose a net- work by IP Router.

Viewer Setup

-Click the [Viewer Setup] for Viewer Setup.

-Viewer Setup sets up various kinds of items related to Smart Viewer motions.

-Viewer Setup is composed of 5 items, Video Recording, File Converting, Sequence Time, OSD Display, and Auto Connection.

1

2

3 4

5

!This is used for the setup of information necessary for saving the video data in display in *.dvr file format while you are connected to SHR-4080P.

@This is used for the setup of information necessary for converting the file saved in your PC in *.dvr file format into JPEG.

#This is used for the setup of information necessary for Auto Sequence Mode.

$This is used for the setup of information on OSD display for Smart Viewer.

%This determines whether Smart Viewer shall be automatically connected to DVR(SHR-4080P) or Site when it begins running.

10-39 10-40