SHR-4080P USER’S MANUAL
4Record Mode
If you press the front “REC” key, the mode to be recorded will be determined.
☛For Event Recording Mode value setup, refer to
●Mode
On : Pressing the REC key starts recording the current channel.
Off : Even pressing the REC key does not affect current channel recording. The default is set to “On”.
●Video Size
Determines the size of a screen to be recorded. Full D1 : 720x576 (L) ➝ Large
Half D1 : 720x288 (N) ➝ Normal
CIF : 352x288 (S) ➝ Small
Note
[Monitor Out]
You are not allowed to set up Video sized “Full D1” and “25ips” of Rate simultane- ously. The system does not support both at once.
●Quality
Recording resolution will be determined. Choose one from Level 1(Low) to Level 8 (High). Level 8 supplies the best resolution
●Rate
Determines Frame Rate to be recorded. Frame Rate means the number of screen recorded every second.
Set to 25ips, the system records too many screens per second and play continues intermittently since recording is more detailed. This is appropriate for concentrated monitoring zone setup.
25 ips/ 12.5 ips/ 8.33 ips/ 6.25 ips/ 5 ips/ 2.5 ips/ 1 ips
Note
[Monitor Out]
You are not allowed to set up “25ips” of Rate and Video sized “Full D1” simultane- ously. The system does not support both at once.
5Event Mode
●The detailed items of Event Record Menu are as follows.
Evnet Record Mode
Determines a mode to be recorded when an event occurs.
●V. Size (Video Size )
Determines the size of a screen to be recorded. Full D1 : 720x576 (L) ➝ Large
Half D1 : 720x288 (N) ➝ Normal
CIF : 352x288 (S) ➝ Small
Note
[Monitor Out]
Simultaneous setup of "Full D1" in Video Size and "25ips" in Rate is prohibited. This is not supported by the system.
