SHR-4080P USER’S MANUAL
●Setup Item Selection Button
-This button is used for the selection of each Setup item.
-This is composed of 4 items, DVR Setup, Viewer Setup, Site Setup, and S/W Version.
-DVR Setup: DVR Setup allows you to change the remote Menu setup items of
-Viewer Setup: Viewer Setup allows you to set up various kinds of items concern- ing operations of Smart Viewer.
-Site Setup: Site Setup allows you to set up
-S/W Version: S/W Version shows the current version of Smart Viewer, system requirement, and the System S/W version of
●Save/Cancellation of Revised Information
-Click the [Apply] button to save the information revised in the Setup window click the [Cancel] button to display the information before such a revision.
●Closing Setup Window
-Click the [X] icon on the top right corner of the Setup window or the [Close] button to close the Setup window.
-If more than one Setup item have been revised before you close the Setup window, the following message box pops up. If you press OK, the revised information will be saved, closing the Setup window but if you press CANCEL, the revised information will be flown away, closing the Setup window.
DVR Setup
-Click the [DVR Setup] button for DVR Setup.
-You can change the setup items of
-DVR Setup is composed of 5 items, System, Camera/Audio, Monitoring, Recording, and Network.
Note
- DVR setup Where
-You are authorized with access to DVR Setup in an Admin capacity only. The button will not be activated if you are connected to
1
2
!Among more than one
@The setup menu for selected
