6Record Schedule
You may select a time when recording starts automatically.
Selection by the day or by the time is available.
The default is set to “None”.
●Pressing “CH > “copies the value of Channel 1 to all the channels.
●The horizontal axis numbered from 0 to 23 represents the time value.
The vertical axis numbered from S to H represents the day value. (H :Holiday) Selection by the day or by the time is available.
●Pressing “ALL” converts the overall setting of the selection window into Continuous➝ Event➝ Both➝ None.
●Continuous Recording
Recording starts automatically on the preset time.
Recording follows the condition established in
☛Refer to
●Event Recording
Recording starts automatically when Event occurs to Alarm/Motion Detection/Video Loss within a designated time.
Recording follows the condition established in
☛Refer to
●Both(Continuous, Event)
On occurrence of Event, Continuous Recording is replaced with Event Recording Mode.
●Holiday
If you press “Holiday”, a calendar pops up and you are able to designate holidays. Move to a date and press “Enter” to complete designation.
Press “Enter” once more to cancel designation. “H” at the bottom of the table means a holiday.