SHR-4080P USER’S MANUAL
-As long as Site for modification is connected with the current Smart Viewer, the following message box will pop up and Site will not be modified. Be sure to cut the connection between Site and Smart Viewer before you modify it.
- If you select one DVR(SHR-4080P) and press the [Modify] button, the following message box will pop up and modification to DVR(SHR-4080P) is prohibit- ed. Modification to DVR(SHR-4080P) shall be done only in DVR List.
●DVR(SHR-4080P) Addition to Site
-If you press the [Add] button, DVR(SHR-4080P) selected from DVR List will be added to the Site selected from Site List.
-You may add up to 4 DVRs(SHR-4080P) to one Site and DVR(SHR-4080P) com- posing Site may be deleted from Site List.
-If you press the [Add] button unless a Site is registered in Site List, a new Site naming “Site [0]” as a default will be created to which DVR(SHR-4080P) will be added.
-As long as Site for DVR(SHR-4080P) addition is connected with the current Smart Viewer, the following message box will pop up and DVR(SHR-4080P) will not be added to the Site. Be sure to cut the connection between Site and Smart Viewer before the addition
S/W Version
- If you press the [S/W Version] button, Smart Viewer version, system require- ments, and the version of DVR(SHR-4080P) System S/W, being connected to Smart Viewer, if ever will be displayed.
-You can upgrade the on-line DVR(SHR-4080P) System S/W remotely. You are authorized with S/W upgrade in an Admin capacity only. In the capacity of user or if you are isolated with DVR(SHR-4080P), your access will be denied.
1
2
!Smart Viewer Version and system requirements will be displayed.
@Here displays the version and name of DVR if any DVR(SHR-4080P) is being connected with Smart Viewer. You are also able to upgrade DVR(SHR-4080P) S/W by transmitting it to on-line DVR(SHR-4080P).