Samsung SHR-4080P manual 82

SHR-4080P USER’S MANUAL

●Smart Viewer Version

- Smart Viewer Version and system requirements will be displayed.

●DVR Version

-DVR Version not only displays the connected DVR(SHR-4080P) name if any DVR(SHR-4080P) is being connected with Smart Viewer or the name of DVR(SHR-4080P) composing a site if any DVR(SHR-4080P) is being connected with the site but also displays DVR(SHR-4080P) S/W version.

-As long as Smart Viewer is isolated from DVR(SHR-4080P), this part remains inactivated.

-Each DVR Version has a check box, which is used for S/W Upgrade.

●DVR(SHR-4080P) S/W Upgrade

-Smart Viewer upgrades on-line DVR(SHR-4080P) S/W remotely.

!Check a DVR(SHR-4080P) to be upgreaded among DVRs(SHR-4080P) on line.

@Click the following button to open the “SHR-4080 Firmware” file in tgz format.

@Press the [Upgrade] button to transmit a file to the selected DVR(SHR-4080P) and start upgrade of DVR(SHR-4080P) S/W.

#The progress of file transmission and upgrade will be displayed at the bottom.

Caution

Be sure to suspend all the DVR system functions in action such as recording, MENU, backup, and play before you upgrade DVR(SHR-4080P) S/W.

Never try to turn the DVR(SHR-4080P) power off during such S/W upgrade. S/W upgrade requires about 5 minutes.

If S/W upgrade is suspended accidentally, the previous S/W will be left intact.

Note

The new Firmware necessary for DVR(SHR-4080P) S/W upgrade shall be downloaded from CCTV Part in Products Section at http://www.samsungelectronics.com.

10-51 10-52