Before installation, you have to be familiar with the cautions on page 14 and fill in the holes that are not used for installation. The holes that are not used should be tightly sealed up using the screws provided for waterproofing. (Refer to page 14)
To install your camera bottom on a pipe1 After connecting the power and video cables, throw them inside the pipeline and screw the male thread pipe into the female pipe thread in your camera tightly to fix the Main body. (In this case, be sure to tape with Teflon tape before assembly for waterproofing. Be careful for the wiring cable not to be stuck in the connection area.)
2 Adjust the angle of the camera in search of a better view.
1. Separate the Dome cover using the
(To make loose the screws, rotate counterclockwise.)
2.Adjust the lens direction. For more information, see page 20 “Adjusting the camera direction.”
3 Attach the Dome cover. (Screw the connection bolts tightly using the
To change the SAMSUNG logo position, move the location of the connection rubber band as show below and rotate for assembly. (The rotation limit is 180 degree.)
Installation and Connection _15