SEARChING FOR ThE CAMERA
IP Installer screen layout
1 | 2 | 3 | 4 | 5 | 6 |
7 8 9 10
1device Name : Model name of the connected device.
2Mode : Shows the current selection between <Static>and <Dynamic>.
3Mac Address : The Mac address of the network interface of the camera that is printed on the rear panel.
4IP Address : The IP address of the camera. (Default setting is '192.168.1.200'.)
5UPnP Status : This is unavailable for this camera.
6URl : This is DDNS address that can be used to connect from an external Internet. However, if the DDNS update fails, it will be displayed as an IP address of the camera.
7Search Button : Searches for the camera connected to the current network.
8Auto Set Button : Sets up the camera network settings automatically using the
<IP Installer>.
9Manual Set Button : Allows the user to set up the camera network settings manually.
10 Exit Button : Exits the IP Installer program.
On Windows Vista, the settings should be configured by the Administrator to use the IP installer normally.
Network Connection & Setup _35