Samsung SNC-B5395P To install the camera side on a pipe

To install the camera side on a pipe

1 Pull the power and video cables through the pipe connection hole on the camera side.

1. Remove the side cover from the Case using a coin or minus (-) driver. (Rotate counterclockwise.)

2.Push the power and video cables stretched outside of the bottom hole

into the Case. And pull them out from the side cover of the Case.

2 Attach the removed side cover to the bottom hole and rotate it clockwise using a coin or minus (-) driver.

(Be sure to insert the O-ring (P22 T2.4) into the hole before assembly. The ring is necessary for waterproofing.)

16_ Installation and Connection