[STEP 2] Checking if the IP router is connected to the xdSl/Cable modem properly
Select <Status> from the Settings menu of the IP RouterIf it is properly connected, <IP Address>, <Subnet Mask> and <Gateway> provided by your ISP are displayed. Please remember these values because they are required so that an external remote computer of the IP router connects to the camera. However, note that certain ISPs change the settings of <IP Address>, <Subnet Mask>and <Gateway>on a regular basis
If the IP router is not properly connected, press the [Connect] button to try to reconnect or check if the settings of the IP router are correct.
[STEP 3] Setting the IP addressRefer to "Static IP Setting" on page 36 or "Dynamic IP Setting" on page 40.[STEP 4] Connecting a local PC in the IP router to the camera1
2
If found,
28_ Network Connection & Setup