Samsung SR10J503AU Installation

Installation

Power of the charger must be on at all times.

Power lamp

(Red)

Install it in a place without obstacles and danger of falling.

About 0.5 m

Installation

About 0.5 m

note

About 1 m

•Install the charger in a place where the floor and wall are level.

•Install the charger along the grain of wooden floors.

•If the power switch is off, the robot vacuum cleaner will not charge even if it is docked on the charger.

•Always turn on the power of the charger.

––If power is not supplied to the charger, the robot vacuum cleaner cannot find it and cannot automatically recharge.

––If the robot vacuum cleaner is left detached from the charger, the battery will drain naturally.

•If the robot vacuum cleaner is in energy-saving mode, power will not come on even if the power switch is turned off and then on. Press and hold the Start/Stop button on the robot vacuum cleaner.

12