Samsung SR10J503AU manual 158

•If the robot vacuum cleaner is turned off, power cannot be turned on by the Power button of the remote control.

Press and hold the Start/Stop button on the robot vacuum cleaner.

•If the battery becomes low during Auto/ Max clean mode, the robot vacuum cleaner will recharge and finish cleaning the remaining area after recharging. (Repeat cleaning frequency: 1 time)

•You cannot select and execute Max/ Manual clean mode while charging.

•Do not unnecessarily move the robot vacuum cleaner or press buttons while it is in Auto/Max clean mode. It assumes that cleaning is complete and starts cleaning again from the beginning.

•If the Point cleaning button is pressed while the robot vacuum cleaner is charging, it will move backward about 250 mm and rotate 180º.

•If the robot vacuum cleaner senses the bumping impact or fall, it will move backward automatically.

•If the Point cleaning button is not pressed for more than 2 seconds, the point cleaning function will be turned off and the robot vacuum cleaner will operate according to the previous operation as the follows:

––When it was in the Stand-by mode, it will stop on the spot.

––When it was in the Manual clean mode, it will stand by on the spot for the Manual mode.

––When it was in the Auto/Max/Edge clean mode, it will operate in the previous clean mode.

––When it was in the Spot clean mode, it will operate in the Spot clean mode from the spot.

––When it was returning to the charger to charge itself, it will move to the charger again.

•When the robot vacuum cleaner is charging automatically since the battery indicator blinks, the point cleaning function will not operate.

Appendices

32