Samsung SR10J503AU Recharge, Low battery (Lo), Automatic charging

Automatic charging

When the battery indicator blinks during cleaning, the robot vacuum cleaner will return to the charger to charge itself automatically.

Recharge

You can command the robot vacuum cleaner to recharge at the charger while it is in cleaning process.

Low battery (Lo)

Manually charge the robot vacuum cleaner by placing it on the charger.

Steps to take if recharging is not being executed.

Check the installation status of the charger when:

•the charger is located in a place where the robot vacuum cleaner cannot easily access.

•distance between the charger and robot vacuum cleaner is over 5 m apart.

––It may take a long time for the robot vacuum cleaner to return to the charger for recharging.

Manually charge the robot vacuum cleaner when:

•the charger is located in a corner.

•battery is fully exhausted.

•the robot vacuum cleaner is stuck by obstacles (furniture etc.).

•the robot vacuum cleaner can’t climb threshold near charge. (Height of the threshold that the robot vacuum cleaner can climb: about 1.5 cm and below)

•when the battery indicator blinks and “Lo” is displayed.

•when the robot vacuum cleaner is set on Spot clean or Manual clean mode.

Installation

15