Kramer Electronics Revision 6 manuals

94 pages3.81 Mb

2Contents
- 9Introduction
Table 2: Room Controller Commands Available
10 describes K-Config triggers in detail.
- 11Introduction
Table 4: Room Controller Devices Limitation
121.6 Quick Start To configure your Room Controller, follow these basic steps:
243. Right click the label and buttons to name them (see Figure 23):
Figure 23 illustrates the final appear ance of the virtual device:
- 254.1.2 The RC-4 Remote Controller Compatible with SL-1, SL-10, SL-12 and SV-552
32Tab Area Settings
Table 7: The Device Settings Tab Features
Tab Area Settings
33Table 8 summarizes date and time setting options:
- Table 8: Setting the Date and Time
- 34Tab Area Settings
Figure 43: Web Settings Window
392. Select a new action from the drop-down list (for example, Slow Blink), and click OK:
The new action replaces the previous one:
- The Triggers
524. Select the condition for activating the trigger:
- Figure 89: GPI/O Trigger Timeout (Digital Input)
Figure 90: Selecting the GPI/O Trigger from the Available Triggers List
7. Add actions to the new trigger (see Figur e 91).
- Figure 91: Adding Actions to the GPI/O Trigger
58Figure 105 shows the port command actions1:
- 6.11.2 The Relay Command (Port Switch) Action Type
6.11.3 The Button Light Action Type
646.11.12 The Delay Action Type
67The Driver Manager
Figure 130: The Driver Manager Window Table 9: Driver Manager Window Features
The Driver Manager
68) Section 9.1.2 Serial range commands (see
- 9.1.1 Creating a Serial Command
) Section 9.1.3
Figure 131: New Serial Command Window
69Write the serial command1, as illustrated in Figure 132.
The Driver Manager
Figure 159: Query Command Details Windows (for Lamp Hours and Power, respectively)
Table 10: Query Format Details
81Section 9.2.1 shows how to set the query details for the Lamp Hours query and 9.2.2Section
shows how to set the query details for the Power query.
83The Query Format is set to encode the projector response, as defined in Table 12:
Figure 163 shows the Query Format:
84Table 13 shows the query format details:
859.2.2 Sett ing the Power Query
The Kramer K-Config Menus
Figure 169: The File Menu
Table 16: File Menu Features
10.1.1 Starting a New Project
Figure 170: New Project Warning
882. The Save as Window appears to let you save the n ew project under a new name:
- Figure 171: Project Save as Window