Manuals
/
Brands
/
Photography
/
Camera Flash
/
Minolta
/
Photography
/
Camera Flash
Minolta
5600HS (D) appendix
Please, tick the box below to download manual:
Contents
Main
FOR PROPER AND SAFE USE
WARNING
CAUTION
CONTENTS
CAMERAS AND FLASH UNITS
Cameras
Flash Units
NAMES OF PARTS
Flash Unit Diagram Control Panel
NAMES OF PARTS
Data Panel
BASIC OPERATION
The section explains preparations for use of the flash, and the basic details of taking photos.
Automatic flash generates a flash only as necessary. Fill flash generates a flash with each photo.
INSTALLING BATTERIES
Checking Batteries
BATTERIES
ATTACHING AND REMOVAL AUTO POWER ON/OFF AND FILM
Attaching To The Camera
PREPARATION
Push the mounting foot firmly onto the camera until it stops.
Removing From The Camera
P MODE FLASH: THE BASICS
P MODE FLASH
Flash Range
P MODE FLASH: THE BASICS EXPOSURE MODES
A Mode Flash
S Mode Flash
M Mode Flash
APPLICATIONS
The section explains the various methods available to make full use of the flash unit.
ZOOM FLASH
ZOOM FLASH COVERAGE
Auto Zoom
Page
TEST-FLASH/MODELING FLASH
1. Set the test-flash mode selec- tion/hold switch to the desired mode.
TEST / MODELING
2. Press the test-flash button (modeling-flash button) when charging is complete.
BOUNCE FLASH
Adjusting Bounce Angle
CLOSE-UP PHOTOGRAPHY (DOWNWARD BOUNCE)
Rotate the flash downwards while pressing the bounce lock-release button.
32 33
Press the data panel illuminator.
ILLUMINATORS
DATAPANEL ILLUMINATOR AF ILLUMINATOR
MODE AND SELECT BUTTONS
ON
MODE/SELECT BUTTON
1/32
10
MANUAL FLASH (M)
MANUAL FLASH
2. Press the mode button to dis- play on the data panel.
1. Select the M mode on the cam- era.
3. Press the + or button to select the power level to be set.
HIGH-SPEED SYNC (HSS)
HIGH-SPEED SYNC
WIRELESS/REMOTE FLASH MODE
Types Of Wireless/Remote Flash
[1] Using the built-in flash (p. 46)
[2] Using two flash units (p. 47)
[3] Using the Wireless Remote Flash Controller (p. 52).
Wireless Flash Range
Notes On Wireless Flash
[1]-2 Ratio-Flash Control Using The Built-In Flash
[1]-1 Using The Built-In Flash
[1]-3 Setting Wireless/Remote Flash By Flash Only
[2]-1 Using Two Flash Units
[2]-2 Ratio-Flash Control Using Two Flash Units
[3]-2 Ratio-Flash Control Using Two Or More Flash Units
[3]-1 Using Wireless Remote Flash Controller
3. Press the + or button to select for one flash, and for another.
4. Press the select button. Using with 3600HS (D) or 3500xi
Taking Photos
CONNECTING CAMERA AND FLASH BY CABLE
Flash Units
CONNECTING BY CABLE
CONNECTING CAMERAAND FLASH BY CABLE
Flash-Ratio Control (varying the intensity of individual flash)
CONNECTING BY CABLE
Equalizing The Power Level Of All Flash Units
SETTING POWER LEVEL (LEVEL)
POWER LEVEL
MULTIPLE FLASH (MULTI)
MULTIPLE FLASH
Maximum Number Of Continuous Flashes
With nickel-metal hydride batteries
Flash frequency (Hz)
MULTIPLE FLASH (MULTI)
7. Press the select button to blink [LEVEL] on the data panel.
8. Press the + or button to select the power level to be set.
9. Press the select button. 10.Set the shutter speed and aperture.
11.When the flash is fully charged, press the shutter- release button to take the photo.
CUSTOM FUNCTIONRESET TO DEFAULT SETTINGS
1. Press the select button for 3 seconds.
3. Press the mode button.
1. Wireless channel setting
2. Flash range units (m/ft)
4. Time to auto power off when using wireless
3. Time to auto power off
APPENDIX
Using Minolta Digital Cameras
(Dimge RD3000, Digital camera RD-175)
USE IN COMBINATION WITH OTHER PRODUCTS
Using Early AF Series Single Lens Reflex Cameras
COMBINATION
(Maxxum/Minolta 9000, 7000, 5000)
Using APS Single Lens Reflex Cameras
ACCESSORIES
Off-Camera Accessories
ACCESSORIES
External Battery Pack EP-2 Set
Temperature
CAUTIONS WHILE HANDLING
During Photography
CAUTIONS
Batteries
PERFORMANCE
PERFORMANCE
Page
Printed in Japan 9222-8841-11 P-B00X
2000 Minolta Co., Ltd. under the Berne Convention and universal Copyright Convention