RESET TO DEFAULT SETTINGS
Most of the flash functions return to the default settings, as follows, if both the + button and – button are pressed and held for three seconds.
Item | Settings | Page |
|
|
|
Flash on/off | On (Auto on or on) | 15 |
|
|
|
Flash coverage (zoom) | Auto zoom (85mm) | 23 |
|
|
|
Flash mode (TTL/M/MULTI) | TTL | 36 |
|
|
|
High speed sync (HSS) | On | 38 |
|
|
|
Wireless/remote flash (WL) | Off | 40 |
|
|
|
Ratio control (RATIO) | Off | – |
|
|
|
Power level in TTL/M | 1/1 | 58 |
|
|
|
Power level in multiple flash | 1/32 | 62 |
|
|
|
Frequency in multiple flash (Hz) | 5 | 60 |
|
|
|
Repetition in multiple flash (TIMES) | 10 | 61 |
|
|
|
CUSTOM FUNCTION
The various flash settings may be changed as necessary. The fol- lowing five items may be changed.
•Wireless channel setting (channels 1~4)
•Flash range units (m/ft)
•Time to auto power off (4 minutes, 15 minutes, 60 minutes, none)
•Time to auto power off when using wireless (60 minutes, none)
•Exposure modes in which manual flash and multiple flash may be set (M mode only, all modes)
1. | Press the select button for 3 |
|
2. | seconds. | FUNCTIONCUSTOM |
Press the select button to | ||
• The first item (wireless channel set- |
| |
ting) is displayed.
select the item, and press the + or – button to select the desired setting.
• Each time the select button is pressed, the next of the five items appears on the data panel (see fol- lowing page).
Continued on next page
64 | 65 |
