2Wire 1000S, 1000SW Wireless Connection

19
Note: If you use a 2Wire wireless adapter (PC card or USB adapter) for wireless networking, the
HomePortal Setup Wizard software automatically configures it to communicate with the HomePortal
during setup, but you will need to install the driver. See Appendix A for detailed installation instructions.
If you are NOT using a 2Wire wireless adapter, you will need to manually configure your adapter to
communicate with the HomePortal BEFORE installing the HomePortal software. See Appendix B for
detailed configuration instructions.
1. Install your wireless adapter according to the manufacturer’s instructions (see note above).
After your adapter is successfully installed, repeat Step 3 “Install the HomePortal
Software” on page 14.
Wireless Connection Model 1000SW only
Requires a computer with 802.11b wireless adapter installed