Read Only Button

When the Read Only button is selected, the Dynatel1420EZ Writer reads all of the iD-Markers that are in the Dynatel1420EZ Stand and then sends the results back to DynatelPCTools.

The written iD-Marker data, if any is present, is then displayed as shown in the following screen shot;

Marker

Data

Markers read without errors

The information from each read marker is displayed in the Marker Data / Status section. The following information is displayed;

The Serial ID column displays the unique serial number of each iD-Marker.

The Model column displays the iD-Marker part number, utility type (frequency) and the iD-Marker type (i.e., Ball, Near Surface or Disk).

78-9000-0120-3-A

11

Page 11
Image 11
3M 1420EZ manual Read Only Button