18.3Place several drops of alcohol on to the rectangular rubber pad.
18.4Before the alcohol evaporates, place a sheet of the 0.5 micron pale gray diamond lapping film on the polishing pad, shiny side down.
18.5Clean the lapping film with a
Note: The 0.5 micron diamond lapping film can be used for up to 10 connectors.
18.6Place several drops of distilled water on to the diamond lapping film.
18.7Insert the connector into the polishing jig assembly.
18.8Clean the flat side of the polishing jig with a
18.9Place the polishing jig assembly on the wet diamond lapping film. Perform 3 to 4 figure eights.
18.10Leaving the polishing jig assembly positioned on the lapping film, rotate 180 degrees. Perform 3 to 4 additional figure eights.
22 |
|
