3M 78-8135-4385-3-A - page 10

10 78-8135-4385-3-A
10.2 Snip the aramid yarn to 5-6 mm (approx. 3/16").
10.3 Flare aramid yarn evenly around buffer.
10.4 Using the 3M™ Stripping Tool 6365-ST, remove the
buffer in small increments until 21–22 mm (approx.
7/8") of buffer is left.
10.5 Using a lint-free cloth moistened with isopropyl
alcohol, clean the bare fiber to remove any oils or
acrylate coating debris.
10.6 Check the final strip lengths and adjust if necessary