3.3The 3.0 mm LC connector contains (A) dust cap,
(B) connector, (C) metal strength sheath, (D) metal crimp sleeve, (E) strain relief boot.
Note: Multimode simplex yokes are beige and singlemode yokes are blue.
4.0Setup
4.1Plug in the 120V or 230V power cord. Turn on the
3M™ Hot Melt Oven. The oven requires 6 minutes to warm up (red exposed on switch indicates power on).
4.2Open the connector package and remove components.
4.3Attach hot melt holder handle to the load adapter with the slot aligned to the front.
A B C D E
6 |
