3M 965DSP-B instruction manual Battery Holder, Test Leads, Replacement Items

Battery Holder:

The plastic battery holder that comes with the 965DSP-B uses six “AA” alkaline batteries (alkaline batteries are not included).

Use alkaline batteries only when the NMH battery pack is discharged and the AC/DC adaptor is not available. Typical lifetime of the alkaline battery pack is eight hours of normal use (less if you use the backlight or work in very cold weather).

The alkaline battery pack is installed the same way as the NMH pack.

Test Leads:

The 965DSP-B comes with a Red/Black test lead pair, a Blue/Yellow test lead pair, and a separate Green test lead.

The Red/Black and Green test leads are used for most measurements. The Yellow lead is used with RFL. The shorting ‘strap’ that comes with the 965DSP-B is used with RFL.

Keep the test leads clean and dry at all times to insure best accuracy of the measurements. Use soap and water to clean them if necessary.

Replacement Items:

You may order any of the following replacement items from 3M. Contact 3M Telecom Systems Division customer service at 800 426 8688 for more information.

Accessory	3M Part Number
NMH Battery Pack	80-6108-6473-0
Red/Black Test Lead Pair	80-6108-6435-9
Blue/Yellow Test Lead Pair	80-6108-6436-7
Green Test Lead	80-6108-6437-5
Ground Strap	80-6109-3830-2
AC/DC Adaptor	80-6108-6393-0
Carrying Case	80-6108-6392-2
Alkaline Battery Holder	80-6108-6472-2

40