Auto

Use this function to perform an automatic sequence of tests on an inactive or active pair.

Press the [Up] or [Down] key to move to the Inactive or Active test. Press the [Enter] key to accept the choice go and to the measurement.

Inactive Pair

Inactive tests are performed on non-working lines and include: DC Volts, Resistance, Opens, Load Coils, and Capacitive Imbalance.

The results appear as each test is completed. If a test cannot be done, “***” appears in the appropriate result box.

34

Page 34
Image 34
3M 965DSP-B instruction manual Auto, Inactive Pair