Auto Setup (continued)
There are three choices in the Auto Setup menu:
•Dial Loss
•Dial Noise/Longitudinal Balance
•Opens Cable Type
Press the [Up] or [Down] keys to move to a desired selection. Press the [Enter] key to accept the choice. Use the [Back] key to return to the Auto Menu.
Dial Loss:
Use this setup to enter a ‘milliwatt’ or ‘Dynatel 1020’ test line number for the Active Pair Loss measurement.
The screen and controls for the Auto Dial Loss setup are similar to the Dial Loss screen.
Dial Noise/Longitudinal Balance
Use this setup to enter a ‘quiet’ test line number (or a ‘1’ to break dial tone) for both the Active Pair Noise and Longitudinal Balance measurements.
The screen and controls for this setup are similar as the Dial Noise screen.
Opens Cable Type:
Use this setup to select the Cable Type used for the Inactive Pair Opens measurement. Note that you may not select Capacitiance from this menu.
36
