10 | EX II 3000SP Controller Reference Guide | |
|
|
|
|
|
|
To effectively integrate and test the EX II 3000SP controller, you will need the following items:
•A 3M Touch Systems TouchPen (P/N
•A 3M Touch Systems touch screen
•A method of establishing the serial data communication between the controller and your system. The 3M Touch Systems
•A method of supplying +12VDC internal power to the controller.
•A touch screen driver with an appropriate calibration routine.
Note: You can use TouchWare, which includes the touch screen device driver and utilities software as the software interface.
The controller measures 1.35 x 4.8 inches with a total height profile of 0.35 inches from the thru hole pins on the trace side of the board to the top of the highest component on the opposite side. The EX II 3000SP has a touch screen connector, a TouchPen connector and a serial cable connector.
3M Touch Systems Proprietary Information