Integrating the EX II 3000SP Controller

11

 

 

 

 

 

 

 

 

 

 

Figure 2 EX II 3000SP Connector LocationsFigure 3 EX II 3000SP Overall Dimensions

Establishing the Data Connection

The EX II 3000SP controller requires that an RS-232 serial communication cable be attached to connector JP3.

You can use a 3M Touch Systems RS-232 cable (P/N 7311273). One end of this cable plugs into the RS-232 connector (JP3) on the EX II 3000SP controller. The other end, which has a 9-pin D connector, plugs into a serial COM port on your PC. Table 1 describes the interconnections for the 3M Touch Systems RS-232 cable.

3M Touch Systems Proprietary Information