Client Settings, Both | 4XEM IPCAMWFD specification

Client Settings

There are four settings for the client side.

Media Options - For the User to determine whether to receive video, audio or

both.

Protocol Options – Which allows choiceschoosing on connection protocol between client and server. There are two protocol choices to optimize your usage – UDP and HTTP.

The UDP protocol allows for more real-time audio and video streams. However, some packets may be lost due to network burst traffic and images may be obscured.

The HTTP protocol must be selected if the network is protected by a firewall which allows only HTTP Port (80) to be opened. If there is no restriction, UDP protocol is recommended. Generally speaking, the client’s choice will be in the order of UDP → HTTP. After the Network Camera is connected successfully, “Protocol Options” will indicate the selected protocol. The selected protocol will be recorded in the user's PC and will be used for the next connection. If the network environment is changed, or the user wants to let the web browser to detect again, manually select the UDP protocol and save, then return to HOME to connect to the Network Camera.

- 18 -

Image 22

4XEM IPCAMWFD manual Client Settings, Both

Contents

Page Page Before You Use This Product Package Contents Table of Contents Smtp FTP AppendixPage Hardware Installation Ethernet Connection Mount the Camera Page Page Page Software Installation Page Page Page Initial Access to the Network Camera Installing Plug-in Check Network Settings Add Password to Prevent Unauthorized Access How to Use Authentication Primary User’s Capabilities Main Screen with Camera View Configuration Camera view Client Settings BothPage Administrator’s Capabilities Fine-tuning for Best Performance For Best Real-time Video Images Somewhere Between Real-time and Clear ImagesOnly Quality Images Will Do Select for Motion Jpeg Protect Network Camera by Passwords Opening Accounts for New Users If the web space has FTP service Demo on Multiple Sites Mid-scale ServiceProduct Demo for E-business Large-scale Service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Send Snapshots When Motion is Detected Build a Security ApplicationPage Definitions in Configuration System Parameters User Group Administration Page Edit User Network Settings General Streaming Ddns & UPnP Page Mail & FTP SmtpPage Page Video Codec Parameters Page Image Settings Contrast Hue Saturation Camera Settings Audio Page Motion Detection Weekly Schedule Application SetupEvent Operation Sequential Operation Naming rule of snapshot file FTPPage Viewing System Log Factory DefaultViewing System Parameters Troubleshooting Appendix Frequently Asked Questions Page Page Overview URL commands of Network CameraStyle convention Get server parameter values General CGI URL syntax and parametersMethod GET/POST Set server parameter values Parameter pair Parameter pair Available parameters on the server WirelessNetwork Camera With Pan/Tilt/ZoomSkip to invoke default server Yyyy/mm/dd NTP 192.168.0.99 Group Security255.255.255.0 Dns1 IP address Primary DNS server 5003 5002 384000 120For Ntsc only 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Drive the digital output Query status of the digital input Query status of the digital output Capture single snapshot Account management Edit System logs Privilege=dido&privilege=listen Configuration file System InformationPage Preset Locations Technical Specifications Networking