Camera Settings | 4XEM IPCAMWFD guide

Camera Settings

Click on “Camera Settings” button, the Camera settings window will pop up. “AES” - auto electronic shutter, enable this will let CCD sensor adjust electronic shutter automatically.

“BLC” - back light compensation, enable this will help to identify “Flickless” – enable this to fix the electronic shutter to (1/100 NTSC)(1/120 PAL).

In the Camera Settings window, click on “Preview” to see the effect of changing the options. Click on “Save” to set the Camera Settings. Click on “Restore” to recall the

original settings without incorporating the changes.

- 45 -

Image 49

4XEM IPCAMWFD manual Camera Settings

Contents

Page Page Before You Use This Product Package Contents Table of Contents Appendix Smtp FTPPage Ethernet Connection Hardware Installation Mount the Camera Page Page Page Software Installation Page Page Page Installing Plug-in Initial Access to the Network Camera Add Password to Prevent Unauthorized Access Check Network Settings Authentication How to Use Main Screen with Camera View Primary User’s Capabilities Camera view Configuration Both Client SettingsPage Fine-tuning for Best Performance Administrator’s Capabilities For Best Real-time Video Images Somewhere Between Real-time and Clear ImagesOnly Quality Images Will Do Select for Motion Jpeg Opening Accounts for New Users Protect Network Camera by Passwords Product Demo for E-business Large-scale Service Demo on Multiple Sites Mid-scale ServiceIf the web space has FTP service Build a Multimedia Web Attraction SitePage If the web space has no FTP service Image URL Build a Security Application Send Snapshots When Motion is DetectedPage Definitions in Configuration System Parameters User Group Administration Page Edit User General Network Settings Streaming Ddns & UPnP Page Smtp Mail & FTPPage Page Video Codec Parameters Page Contrast Hue Saturation Image Settings Camera Settings Audio Page Motion Detection Weekly Schedule Application SetupEvent Operation Sequential Operation FTP Naming rule of snapshot filePage Viewing System Log Factory DefaultViewing System Parameters Appendix Troubleshooting Frequently Asked Questions Page Page Overview URL commands of Network CameraStyle convention Get server parameter values General CGI URL syntax and parametersMethod GET/POST Parameter pair Set server parameter values Parameter pair Skip to invoke default server WirelessNetwork Camera With Pan/Tilt/ZoomAvailable parameters on the server Yyyy/mm/dd NTP 192.168.0.99 Group Security255.255.255.0 Dns1 IP address Primary DNS server 5002 5003 384000 120For Ntsc only 8000 Save Directly save the adjust image Parameters Group CCD Ntsc & Cmos Script.vssx Application page CGI command Sun Dihigh Query status of the digital input Drive the digital output Query status of the digital output Capture single snapshot Edit Account management Privilege=dido&privilege=listen System logs System Information Configuration filePage Preset Locations Networking Technical Specifications