A&D 2 Plus owner manual Step

STEP 3

When you reach the desired dive time, release the contacts and, after a few moments, the Monitor 3 Air will display the new decompres- sion information. You can then, as shown in step 2, increase and decrease the dive time as you wish.

Note: If there is no activity during the Pre-Dive Planning Mode for three minutes, the Monitor 3 Air automatically returns to Surface Mode or Ready Mode.

STEP 4

Section 4: Pre-Dive Planning Mode

To return to the pre-dive scrolling, touch contacts A & D. If you want to return to Surface Mode or Ready Mode, touch contacts A & D for about three seconds.

WARNING: If two or more divers using computers are planning a dive, planning for all divers must be based on the dive computer showing the shortest no-stop times. Failure to do this may lead to serious injury or death from decom- pression sickness.

47