A&D MC-10K, MC-30K manual Weighing Speed Adjustment

7. Weighing Speed Adjustment / Self Check Function

7-1. Weighing Speed Adjustment

This function detects the influence on weighing that is caused by drafts and/or vibration at the place where the balance is installed and sets the following three weighing speeds (response characteristics) automatically.

The function has three rates as follows:

Changing the weighing speed changes the display refresh rate.

Weighing speeds

0 .000 g

Indicator	Parameter	Weighing Speed	Stability	Display refresh rate
FAST	Cond 0	Fast response, Sensitive value		If the weighing speed is changed as follows:
MID.	Cond 1			MID. or SLOW FAST =10 times/second
SLOW	Cond 2	Slow response,	Stable value	FAST MID. or SLOW = 5 times/second

Step 1 Press and hold the MODE key until RESPONSE is displayed. And then, press the MODE key again quickly.

Press and hold

Release

Press again

Step

2

Press the

MODE

key to select a weighing speed.

Either

,

or

can be selected.

FAST

MID.

SLOW

Select a parameter

with pressing it.

Step

3

After a few seconds of inactivity the balance displays

.

Release and wait

end

Then, it returns to the weighing mode and displays the

end

updated response indicator. The response indicator

remains displayed for a while.

0.000 g

Note

The weighing speed adjustment can be changed at "Condition (Cond)" of "Environment, Display (ba5fnc)" in the function table. Refer to "10. Function

Table" for details.

To set a refresh rate of 5 times/second when the response rate is FAST or 10 times/second when the response rate is MID. or SLOW , change the "Display refresh rate (5pd)" parameter of "Environment, Display (ba5fnc)" in the function table.

If the weight value is not stabilized due to drafts or vibration when “Cond 0 ” is selected by the automatic response adjustment, change the parameter of “Cond ” manually in the function table.

16