Aastra Telecom REV 06, RN-001029-00 manual RTPTxip RTPTxStop

5i Series IP Phone Release Notes

Features in Release 2.2

Note: Once the RTPRx command in the URI is sent to the phone, it stops the phone from listening to any previous RTPRx or RTPMRx commands. The phone starts listening based on the most recent RTPRx command received. This behavior also applies to the RTPRx:Stop and RTPMRx:Stop commands as well but does not enable any further listening.

RTPTx

The RTPTx URI instructs the phone to transmit a Unicast RTP stream or to stop transmitting Unicast or Multicast RTP streams. The RTPTx formats to use with the AastraIPPhoneExecute object in the URI are:

•RTPTx:i:p

•RTPTx:Stop

Where

iSpecifies the IP Address to which an RTP stream is transmit ed.

pSpecifies the UDP port on which to transmit the RTP stream.

Ensure that this is a number greater than 3100.

Stop Specifies to stop any active RTP stream from being transmitted on channel one.

Example: This example sends a unicast RTP stream to 10.30.100.20 on UDP port 21000.

<AastraIPPhoneExecute>

<ExecuteItem URI = ”RTPTx:10.30.100.20:21000”> <AastraIPPhoneExecute>

Example:

This example stops an outgoing active multicast/unicast RTP stream.

<AastraIPPhoneExecute> <ExecuteItem URI=”RTPTx:Stop”>

<AastraIPPhoneExecute>

RN-001029-00, Rev 06, Release 2.2 99