Aastra Telecom REV 06, RN-001029-00 Using the Configured Paging Key on the IP Phone, Step Action

5i Series IP Phone Release Notes

Features in Release 2.2

Using the Configured Paging Key on the IP Phone

The following procedure describes the use of the Paging key. The procedures assumes you have already configured the Paging key using the configuration files or the Aastra Web UI.

Notes:

1. Recipient of a Paging call can set a global “Do Not Disturb” (DND) to ignore any incoming pages.

2.For incoming Paging, the phones use the Intercom configuration settings. The incoming Page is dependant on the “Allow Barge-In” parameter setting and the “Idling/On Call” state.

Aastra IP Phone UI

Step Action

On the IP Phone, press the softkey you configured for Paging (labeled as “Group 1” in the following illustration).

Services	Icom
Dir
Callers

Tues Jan1 10:00am

Group 1

LAB

ACD

The phone opens a multicast RTP session and an outgoing OR incoming phone screen displays as follows:

Paging 00:01

Drop

Press the Drop softkey to end the multicast RTP session and return to the idle screen.

Note: If you enable global DND on the phone, the incoming multicast RTP session is dropped.

RN-001029-00, Rev 06, Release 2.2 67