Aastra Telecom REV 06, RN-001029-00 manual Features in Release

5i Series IP Phone Release Notes

Features in Release 2.2

In previous releases, you could configure one phone number and then select the current mode (All, Off, Busy, No Answer, Busy No Answer). In Release 2.2, you can enable different call forwarding rules/modes independently (for example, you can set different phone numbers for Busy, All, and NoAns modes and then turn them on/off individually).

The following table describes the key and Message Waiting Indicator (MWI) LEDs when you enable CFWD on the IP Phone.

Key LED Behavior	MWI LED Behavior
for All Modes	for All Modes
CFWD key LED RED if CFWD All, CFWD	MWI LED ON if current account in focus has
Busy, or CFWD No Answer is enabled for	CFWD ALL enabled.
the account in focus.	MWI LED OFF if CFWD All is disabled.
CFWD key LED OFF if any CFWD mode
is disabled.

You can enable/disable CFWD and set a CFWD key using the configuration files or the Aastra Web UI. You can set CFWD mode (Account, Phone, Custom) using the configuration files, Aastra Web UI or IP Phone UI.

RN-001029-00, Rev 06, Release 2.2 19