5i Series IP Phone Release Notes

Features in Release 2.2

3

4

Aastra Web UI

The “Local SIP TLS Port” field has a default value of 5061. Change this value if required to a value greater than 1024 and less than 65535.

Note: It is recommended that you avoid the conflict with any TCP ports being used. For example: WebUI HTTP server on 80/tcp and HTTPS on 443/tcp.

Click

to save your changes.

RPORT Support

The Session Initiation Protocol (SIP) operates over UDP and TCP. When used with UDP, responses to requests are returned to the source address from which the request came, and returned to the port written into the topmost “Via” header of the request. However, this behavior is not desirable when the client is behind a Network Address Translation (NAT) or firewall.

A new parameter created for the “Via” header called “Rport” in RFC 3581, allows a client to request that the server send the response back to the source IP address and the port from which the request came.

When you enable “Rport, the phone always uses symmetric signaling (listens on the port used for sending requests).

An Administrator can configure “Rport” using the configuration files or the Aastra Web UI.

RN-001029-00, Rev 06, Release 2.2

123

Page 127
Image 127
Aastra Telecom REV 06, RN-001029-00 manual Rport Support