![](/images/new-backgrounds/1266658/266658151x1.webp)
Removing the Second Fan Bracket
1.See “Removing the Battery” on page 52.
2.See “Removing the Middle Cover” on page 56.
3.See “Removing the LCD Module” on page 57.
4.See “Removing the RTC Battery” on page 63.
5.See “Removing the Fan” on page 63.
6.See “Removing the Thermal Module” on page 64.
7.Remove the three screws that fasten the second fan bracket then remove the bracket.
Removing the ODD Module(1)
1.See “Removing the Battery” on page 52.
2.Remove the screw that fastens the ODD bracket on the bottom. Push the ODD module at the point the red arrow indicates hard.Then remove the ODD module from the lower case.
NOTE: If you need to replace the ODD module only, you can remove the ODD module as the steps above.
Removing the ODD Module(2)
1.See “Removing the Battery” on page 52.
2.See “Removing the Middle Cover” on page 56.
3.See “Removing the Keyboard” on page 63.
4.See “Removing the Upper Case Assemly” on page 65.
5.See “Removing the Thermal Module” on page 64.
6.See “Removing the VGA Thermal Plate” on page 67.
7.Push the ODD module outwards then take the ODD out of the support bracket. Remove the screw that fastens the ODD support bracket then remove it.
Chapter 3 | 68 |