5.Replace the MIC cable under the mylar tab strips, and replace the MIC as shown. Secure the cable by pressing down on the strips.
7.Secure the cable by pressing down on the securing strip.
9.Secure the LCD module with the two securing screws.
11. Replace the two securing screws.
6.Replace the antenna cable as shown. Ensure that the cable is inserted under each tab strip.
8. Place the LCD Panel in the back cover.
10.Insert the Camera Module (adhesive side down), and secure by pressing down to insure cohesion.
12. Connect the Camera Module cable.
Chapter 3 | 133 |
